QuVIS Acuity User Manual - page 31

3. 

To change the IP Address, using the touchpad place cursor over the appropriate control and press the center 

touchpad button to activate the input window. 

Note: You will likely find it easier to configure the network settings using a PS2 keyboard that may be attached 

to the front panel even while the Acuity is turned on. A network address is composed of four parts (octets) 

separated by a period. To modify the next part (octet) of the network address you must use the period (.) button 

to advance. 

4. 

To change the Subnet Mask, place the cursor over that menu item and press the center touchpad button to 

activate the input window. 

5. 

To change the Default Gateway setting, place the cursor over that menu item and press the center touchpad 

button to activate the input window. 

6. 

Restart the system to activate the network changes. 

QuVIS Acuity

™  

Page 30 

QSR Version 3.3