QuVIS Acuity User Manual - page 163
3.
Confirm your selection by clicking on Okay.
Note: Settings contained in the startup config file are not loaded until the system is powered on. To
immediately apply settings stored in a config file, follow the instructions in the
Load custom settings from a
config file
section.
Save current settings to a config file
Use the following procedure to save the current system settings to a configuration file.
1.
Navigate to the Setup Config menu page and click on the Save current setup to config file option.
2.
At the input window, enter a filename for the new config file. If you wish to overwrite an existing configuration
file, simply enter the same name for the current settings to be saved. Don’t worry; the system will prompt you if
you are about to overwrite an existing file. The config file is always saved in the /user/cfg directory.
3.
To save the current settings to the named configuration file, click Save.
QuVIS Acuity
™
Page 162
QSR Version 3.3