QuVIS Acuity User Manual - Restore Factory Settings

Load custom settings from a config file 

Use the following procedure to load custom settings stored in a previously saved configuration file. All settings will 

be applied immediately. To ensure all settings are properly set the Acuity should not be actively playing content 

while a config file is being loaded.  

1. 

Navigate to the Setup Config menu page and click on the Load config file option. 

2. 

Use the middle touchpad button to select/highlight the config file that contains saved setting to be immediately 

applied. The path in the file browser popup window is automatically set to the appropriate directory where all 

config files are stored (/user/cfg).  

3. 

Click Load to load the settings stored in the select config file. 

Note: If any changes are made to the system settings locally using the GUI or remotely after you have loaded 

a configuration, the loaded settings are overwritten for the current session. You may load a config file at any 

time although you should avoid doing so during all active playback and record operations. 

Restore factory settings 

To restore the factory settings, perform the 

Load custom settings from a config file

 procedure selecting the 

factory.cfg file as the file to be loaded in step 2. Alternately, you may also set the factory.cfg config file as the 

Set 

the Default Startup Config File

using the procedure outlined in that section as well.  

QuVIS Acuity

™  

Page 163 

QSR Version 3.3