QuVIS Acuity User Manual - page 16

Analog video Input/Output connections (standard) 

Analog Component video (input) is included (Analog Component Output is optional) in the base configuration of the 

QuVIS Acuity. Some analog video display applications require that sync signals be output on separate outputs (H & 

V). Please review your display requirements to ensure you have the appropriate analog component cables (3-wire 

or 5-wire). 

Note: The Acuity’s ACO (Analog Component Output) module is not capable of supporting dual-link (SMPTE 372) or 

Digital Cinema 2K (2048x1080) video modes.  

3-Wire A

n

alog Component Input (Sync on green) connections 

For standard 3-wire analog component Input applications, make cable connections as follows: 

Connect “Red” channel 

cable here. 

Connect “Blue” channel cable 

here. 

Connect “green” channel 

cable here. 

3-Wire Analog Component Output (Sync on green) connections 

For standard 3-wire analog component Output applications, make cable connections as follows: 

Connect “green” 

channel cable here. 

Connect “Blue” channel cable 

here. 

Connect “Red” channel cable 

here. 

5-Wire Analog Component Input (separate sync) connections 

For standard 5-wire analog component record (input) applications, make input Sync cable connections as follows: 

Connect “Horizontal” sync 

cable here. 

Connect “Vertical” sync 

cable here. 

QuVIS Acuity

™  

Page 15 

QSR Version 3.3