QuVIS Acuity User Manual - page 145
Button Command
Description
end of the asset will be trimmed to make room. The In point of the clip
may be further adjusted using the Slide edit function, which will turn
adjust the Out point of the asset.
To set the Mark Out point position
1. Place the timeline cursor at the desired timeline timecode position.
2. To mark the In point, press the Mark Out button at the bottom of the
screen (using the soft button directly below the display).
Mark Asset
The Mark Asset command is used to set the Mark In and Mark Out points to
correspond with the In and Out points of the selected asset.
Clear In
The Clear In command is used to clear (remove) the defined Mark In flag.
Clear Out
The Clear Out command is used to clear (remove) the defined Mark Out flag.
View Commands
Button
Command
Description
The Zoom In command is used display a more detailed view of the
timeline. The maximum Zoom In level allows you to view details such as
individual timecode positions.
Zoom In
Zoom Out
The Zoom Out command is used to change the timeline view to display
more of the timeline but less of the detail.
Zoom All
The Zoom All command is used to change the timeline so that all
existing edits can be viewed in the active window.
Zoom Max
The Zoom Max command is used to change the timeline view to show
the most detail available (highest Zoom In position).
Scroll Left
The Scroll Left command is used to move the timeline view to the LEFT
without changing the timeline cursors position.
Scroll Right
The Scroll Right command is used to move the timeline view to the
RIGHT without changing the timeline cursors position.
QuVIS Acuity
™
Page 144
QSR Version 3.3