SSD 605C Product Manual - page 112

6-46  

Programming Your Application

605C Frequency Inverter

PASSWORD

This function block contains options

associated with password protection for the

Operator Station.

MMI Menu Map

1 PASSWORD

ENTER PASSWORD

CHANGE PASSWORD

PASSWORD

0000 – [  7]

ENTER PASSWORD

–

0000 – [  8]

CHANGE PASSWORD

–

FALSE – [361] PROTECT LOCAL SP

–

FALSE – [364] PROTECT OP MENU

–

or

MMI Menu Map

1 SETUP PARAMETERS

2 FUNCTION BLOCKS

3 MENUS

4 PASSWORD

ENTER PASSWORD

CHANGE PASSWORD

PROTECT LOCAL SP

PROTECT OP MENU

Parameter Descriptions

ENTER PASSWORD

Range: 0000 to FFFF

Entering a password equal to the password held in the inverter unlocks the Operator Station.

Entering a value that is not equal to the password held in the inverter locks the Operator Station.

When locked, no parameters in the inverter may be modified from the Operator Station (with the

possible exception of the parameters in the OPERATOR menu, see PROTECT OP MENU

below).

CHANGE PASSWORD

Range: 0000 to FFFF

This parameter is used to initially set and if necessary change the password held in the inverter.

When the password is set to 0000, the Operator Station is always unlocked.

PROTECT LOCAL SP

Range: FALSE / TRUE

Enables password protection of the local setpoint. When set to TRUE, the local setpoint is read-

only whenever the inverter is password locked. When FALSE, the local setpoint can be adjusted

regardless of the password.

PROTECT OP  MENU

Range: FALSE / TRUE

Enables password protection of all parameters shown in the OPERATOR menu (except for the

local setpoint entry). When set to TRUE, the parameters are  read-only whenever the inverter is

password locked. When FALSE, the parameters can be adjusted regardless of the password.