SSD 605C Product Manual - page 34
3-12
Installing the Inverter
605C Frequency Inverter
External AC Supply EMC Filter
Model
H
H1
H2
W
W1
D
D1
CO465188U020
229
217
256
55
42
114
76
CO465188U036
272
258
295
74
60
161
123
Model
Phase
Frequency
Current
Voltage
Watt Loss
CO465188U020
3
50/60Hz
20A
520VAC
13W
CO465188U036
3
50/60Hz
36A
520VAC
16W
Table 3-3 External AC Supply EMC Filter Details (dimensions are in millimetres)
WARNING!
Do not use an external ac supply EMC filter with supplies that are not balanced
with respect to earth (IT). They must only be used with earth referenced supplies (TN).
Do not touch filter terminals or cabling for at least 3 minutes after removing the ac
supply.
Only use the ac supply filter with a permanent earth connection.
Mount the filter as close as possible to the inverter.
If the filter is wall-mounted, it must be mounted vertically and fitted with the gland box base (A)
and gland box cover (B). These items are not required if the filter is mounted inside a suitable
cubicle.
Fit a gland box base (A) to the filter at both ends and secure the filter on the wall. Bring the
conduit into each end and complete the wiring. Finally, secure the gland box covers (B) using
the screws and washers.
B
H
H1
W
W1
D
conduit
A
H2
D1
conduit
vertical mounting
gland box
base
gland box
cover
Figure 3-12 External AC Supply EMC Filter Outline Dimensions
(CO465188U036 illustrated)