SSD 605C Product Manual - page 134
6-68
Programming Your Application
605C Frequency Inverter
TEC OPTION
This function block is used to configure the
inputs and outputs of the various Technology
Options that can be fitted.
The Technology Option provides a
communications interface for external control
of the Inverter.
If a Technology Option is present when
defaults are loaded, the TYPE parameter is
automatically set. The parameter names
change when the selection for the TYPE
parameter matches the Technology Option
fitted.
Refer to the appropriate Technology Option Technical Manual supplied with the option for
further details.
MMI Menu Map
1 SETUP PARAMETERS
2 FUNCTION BLOCKS
3 SERIAL LINKS
4 TEC OPTION
TEC OPTION TYPE
TEC OPTION IN 1
TEC OPTION IN 2
TEC OPTION IN 3
TEC OPTION IN 4
TEC OPTION IN 5
TEC OPTION FAULT
TEC OPTION VER
TEC OPTION OUT 1
TEC OPTION OUT 2
TEC OPTION
FAULT [756] – NONE
VERSION [757] – 0000
OUTPUT 1 [758] – 0000
OUTPUT 2 [759] – 0000
NONE – [750] TYPE
–
0 – [751] INPUT 1
–
0 – [752] INPUT 2
–
0 – [753] INPUT 3
–
0 – [754] INPUT 4
–
0 – [755] INPUT 5
–
Parameter Descriptions
TYPE
Range: Enumerated - see below
Selects the type of Technology Option.
Enumerated Value : Technology Option
0 : NONE
1 : RS485
2 : PROFIBUS DP
3 : LINK
4 : DEVICENET
5 : CANOPEN
6 : LONWORKS
7 : TYPE 7
INPUT 1 to INPUT 5
Range: -32768 to 32767
The use of these input parameters depends on the type of Technology Option fitted.
Refer to the Technology Option Technical Manual.
FAULT
Range: Enumerated - see below
The fault state of the Technology Option.
Enumerated Value : Fault State
0 : NONE
1 : PARAMETER
2 : TYPE MISMATCH
3 : SELF TEST
4 : HARDWARE
5 : MISSING
VERSION
Range: 0000 to FFFF
The version of the Technology Option. If no option is fitted then the version is reset to zero.
OUTPUT 1 and OUTPUT 2
Range: 0000 to FFFF
The use of these output parameters depends on the type of Technology Option fitted.
Refer to the Technology Option Technical Manual.