SSD 605C Product Manual - Saving Your Application

5-14  

The Operator Station

605C Frequency Inverter

Creating Custom Screens

You can create two “custom screens”, which can be

very useful when added to the OPERATOR menu.

Each screen contains:

•  a top line of sixteen characters

•  user-definable units

•  user-selectable scaling factor

•  user-selectable limits

•  user-selectable coefficients

This feature may be used to re-display the setpoint, for example, in more convenient units. Refer

to Chapter 6: “Programming Your Application” - CUSTOM SCREEN.

How to Save, Restore and Copy your Settings

Saving Your Application

The PARAMETER SAVE menu at level 1, only available in the Basic and Advanced view

levels, provides two save options:

1.  SAVE TO MEMORY menu at level 2:

saves to non-volatile memory within the Inverter

2.  SAVE TO OP menu at level 2: 

saves to the Operator Station

Note:  The SAVE TO OP function produces a copy of the Inverter’s setup, including all user

options and the current password, refer to “Copying an Application” below.

Restoring Saved Settings

If you are unsure about any changes you have made,

you can re-load the last saved setup from memory.

Enter the LOAD FROM MEMORY menu at level 2 to

display the `UP` FOR ACTION page.

Note:  Pressing the 

∆

 key, as instructed, restores to the Inverter the last saved parameter

settings.

Copying an Application

The Operator Station is a programming tool for writing to the Inverter, where the information is

stored. But the Operator Station itself can also be used to store this data.

Transferring Your Application to Another Inverter

Note:  The Inverter you are copying to must have the same (or a newer software) release. Refer

to the Welcome screen (power-up).

1.  Write the application to the Operator Station via the SAVE TO OP menu at level 2. To

view the SAVE TO OP menu the Operator Station must have Basic or Advanced view level

selected.

2.  Connect the Operator Station to the receiving Inverter.

3.  Select Advanced view level, if necessary. Transfer the data via the LOAD FROM OP menu

at level 2. Two sub-menus allow you to choose between loading a full parameter load

which includes motor-specific data, or just the application without any motor-specific data:

ALL PARAMETERS

APPLICATION ONLY

Refer to Chapter 6: “Programming Your Application” - Motor-Specific Parameters.

HEALTH

LOCAL

SEQ

REF

1

1

103.0          l/s

WHISKY PUMPED

HEALTH

LOCAL

SEQ

REF

1

1

menu at level 2

LOAD FROM MEMORY