SSD 605C Product Manual - Certificates
12-14
Certification for the Inverter
605C Frequency Inverter
Certificates
605C
(5.5
K
W - 11
K
W C
ONSTANT
T
ORQUE
/ 7.5
K
W = 15
K
W Q
UADRATIC
T
ORQUE
)
EC D
ECLARATIONS OF
C
ONFORMITY
Date CE marked first applied: 08.10.1996
Issued for
EMC Directive
Low Voltage Directive
The drive is CE
compliance
with the EMC
Directive when
the unit is used
as relevant
apparatus.
In accordance with the EEC Directive
89/336/EEC and amended by 92/31/EEC and
93/68/EEC, Article 10 and Annex 1, (EMC
DIRECTIVE)
We SSD Drives Limited, address as below,
declare under our sole responsibility that the
above Electronic Products when installed and
operated with reference to the instructions in
the Product Manual (provided with each piece
of equipment) is in accordance with the relevant
clauses from the following standard:-
* BSEN61800-3 (1997)
In accordance with the EEC Directive
73/23/EEC and amended by 93/68/EEC,
Article 13 and Annex III, (LOW VOLTAGE
DIRECTIVE)
We SSD Drives Limited, address as below,
declare under our sole responsibility that the
above Electronic Products when installed and
operated with reference to the instructions in
the Product Manual
(provided with each piece of equipment), is in
accordance with the relevant clauses from the
following standard :-
EN50178 (1998)
marked in
accordance with
the low voltage
directive for
electrical
equipment and
appliances in the
voltage range
when installed
correctly.
M
ANUFACTURERS
D
ECLARATIONS
This is
EMC Declaration
Machinery Directive
Since the
provided to aid
your
justification for
EMC
compliance
when the unit
is used as a
component.
We SSD Drives Limited, address as below,
declare under our sole responsibility that the
above Electronic Products when installed and
operated with reference to the instructions in
the Product Manual (provided with each piece
of equipment) is in accordance with the
relevant clauses from the following standard:-
* BSEN61800-3 (1997)
The above Electronic Products
are components to be incorporated into
machinery and may not be operated alone.
The complete machinery or installation using
this equipment may only be put into service
when the safety considerations of the Directive
89/392/EEC are fully adhered to.
Particular reference should be made to
EN60204-1 (Safety of Machinery - Electrical
Equipment of Machines).
All instructions, warnings and safety
information of the Product Manual must be
adhered to.
potential hazards
are mainly
electrical rather
than mechanical,
the drive does not
fall under the
machinery
directive.
However, we do
supply a
manufacturer's
declaration for
when the drive is
used (as a
component) in
machinery.
Dr Martin Payn (
Conformance Officer)
# Compliant with these immunity standards without specified EMC filters.
SSD DRIVES LIMITED
NEW COURTWICK LANE, LITTLEHAMPTON, WEST SUSSEX BN17 7RZ
TELEPHONE: 01903 737000 FAX: 01903 737100
Registered Number: 1159876 England. Registered Office: Southdownview Way, Worthing, West Sussex BN14 8NN
File Name: P:\PRODUCS\CE\SAFETY\PRODUCTS\605C\LVD\PRODFILE\HK464337.919
ISS:
DATE
DRN: MP CHKD:
DRAWING NUMBER: HK464337.C919
B
22/11/2005
TITLE:
Declarations of Conformity
SHT 1
OF
1 SHTS