SSD 605C Product Manual - page 69
Programming Your Application
6-3
605C Frequency Inverter
Note: Check the source and destination formats from the Function Block diagrams and/or
Chapter 10: “Parameter Specification Tables” because the Operator Station displays
some parameters with the least significant digit suppressed.
Saving Your Modifications
If parameter values or links have been modified or a macro has been loaded, the new settings
must be saved. The Inverter will then retain the new settings during power-down. Refer to
Chapter 5: “The Operator Station” - Saving Your Application.
Understanding the Function Block Description
The following function
blocks show the parameter
information necessary for
programming the Inverter.
The diagrams assume that
the UK country code is
selected and that a 400V
0.75kW power board is
fitted.
Input parameters are shown
on the left hand side, and
output parameters are shown
on the right hand side of the
block.
Instance Name
Names the function block type
Default Value
The default value of the unmodified macro, Macro 0
Input/Output
Parameter Name
The name shown on ConfigEd Lite
Tag Number
Unique identification used for linking and communications
*
Parameters marked with “*” are set to a value depending on the Language
portion of the product code. Refer to Chapter 2: “Understanding the
Product Code” and Chapter 10: “Product-Related Default Values”.
**
Parameters marked with “**” are set to a value depending on the overall
“power build “ of the Inverter indicated by the product code. Refer to
Chapter 2: “Understanding the Product Code” and Chapter 10: “Product -
Related Default Values”
Note: Decimal Places (dp) - some internally-held parameters with two decimal places are only
displayed with one decimal place. These parameters are indicated in the Parameter
Descriptions tables. The Range parameter shows the hidden character as “h”, i.e. xxx.xh.
MMI Menu Maps
The function block descriptions include an easy-find menu showing the menu levels and titles
encountered to find the appropriate menu title, and the parameters contained in the menu(s).
The menu maps are shown as if the Advanced view level is selected.
Where there is more than one sub-menu, i.e. ANALOG INPUT as illustrated, the parameters
shown will be for the last sub-menu. In many cases, these parameters will reflect the name and
number of the last sub-menu.
Because of this intuitive naming of parameters, which is designed to make using the Operator
Station easier, MMI parameter names may vary slightly from Function Block names.
Default Value
Input Parameter
Name
Output Parameter
Name
Default Value
Instance Name
ANALOG INPUT 1
VALUE
[ 16] – 0.00%
BREAK
[ 18] – FALSE
100.00% – [ 14] SCALE
–
0.00% – [ 15] OFFSET
–
0..+10V – [ 13] TYPE
–
FALSE – [ 12] BREAK ENABLE
–
0.00% – [ 17] BREAK VALUE
–
Tag Number
Figure 6-2 Function Block Parameter Information
MMI Menu Map
1 SETUP PARAMETERS
2 FUNCTION BLOCKS
3 INPUTS & OUTPUTS
4 ANALOG INPUT
4 ANALOG INPUT 1
4 ANALOG INPUT 2
AIN 2 SCALE
AIN 2 OFFSET
AIN 2 TYPE
AIN 2 BREAK ENBL
AIN 2 BREAK VAL
AIN 2 VALUE
AIN 2 BREAK