SSD 605C Product Manual - Optional Equipment

3-8  

Installing the Inverter

605C Frequency Inverter

Optional Equipment

Fitting the Remote 6901 Operator Station

The 6052 Mounting Kit is required to remote-mount a 6901 Operator Station. It is possible to:

•  Remote-mount the drive-mounted Operator Station using the port(s) illustrated

•  Remote-mount an additional Operator Station in the lower port (not Frame B) - in this case,

both Operator Stations are fully functional

•  Remote-mount both Operator Stations as illustrated (not Frame B) - in this case, both

Operator Stations are fully functional

You can also replace any Operator Station for a PC running ConfigEd Lite (or other suitable PC

programming tool) in all of the options above.

6052 Mounting Kit Parts for the Remote Keypad

6

Assembly Procedure

Remove the factory-

fitted P3 lead from the

P3 port under the

terminal cover which

connects the fitted

Operator Station. Fit the

ferrite to one end of the

3m connector lead,

passing the cable

through the ferrite twice

as shown below. Plug

the 3m connector lead

from the remote-

mounted Operator

Station into the P3 port

(see the diagram on the

previous page) ensuring

that the ferrite is at the

drive end of the lead

and is as close to the

drive as possible.

1

1

4

1

1

No. 6 x 12mm

3m, 4-way

Steward 28A2025-OAO

6052 Mounting Kit Tools required : No. 2 Posidrive screwdriver

2

3

RS232 / REM OP STA

5

1

4