SSD 605C Product Manual - Emc Compliance
11-4
Technical Specifications
605C Frequency Inverter
Cabling Requirements for EMC Compliance
Power Supply
Cable
Motor Cable
External AC Supply
EMC Filter to Inverter
Cable
Brake Resistor
Cable
Signal/Control
Cable
Cable Type
(for EMC Compliance)
Unscreened
Screened/
armoured
Screened/armoured
Screened/
armoured
Screened
Segregation
From all
other wiring
(clean)
From all other wiring (noisy)
From all other
wiring (sensitive)
Length Limitations
With External AC
Supply EMC Filter
Unlimited
Refer to
“External AC
Supply (RFI)
Filters” table
0.3 metres
25 metres
25 metres
Screen to Earth
Connection
Both ends
Both ends
Both ends
Inverter end only
Output Choke
300 metres
maximum
EMC Compliance
All models
European Community Directive 89/336/EEC
All models
EN50082-1 (1992) and prEN50082-2 (1992) for immunity
If fitted external
filters
EN50081-2 (1994) for Radiated Emissions when wall-mounted
EN50081-1 (1994) for Radiated Emissions when cubicle-mounted
EN50081-2 (1994) for Conducted Emissions all models
External AC Supply (RFI) Filters
External AC Supply EMC Filter
Part No.
Input Supply Details
suitable for earth referenced
supplies only (TN)
Motor Power
Constant Torque
(kW/hp)
Motor Power
Quadratic Torque
(kW/hp)
CO465188U020
380-500V ±10%,
50-60Hz ±5%
upto 5.5/7.5
upto 7.5/10
CO465188U036
380-500V ±10%,
50-60Hz ±5%
7.5-11/10-15
11-15/15-20
External AC Supply EMC Filter
Part No.
Watt Loss at
Full Load Current
(W)
Switching Frequency
(kHz)
Maximum
Motor Cable Length
(metres)
Gland Box Kit
(optional)
CO465188U020
11
3 quadratic
3 & 6 constant
50
BA465189U020
CO465188U036
16
3 quadratic
3 & 6 constant
50
BA465189U036