Xerox 721 Message Manual - page 118

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES

OS2004

Paper trays not set for same size

The length guides of the feeder trays are adjusted for different

paper lengths.  Automatic switching will not be possible.  (This is

an information message appearing at the start of the job.) 

The printer control console displays one of the following: 

BE SURE BOTH TRAYS CONTAIN THE SAME SIZE PAPER-- PRESS

i 

LENGTH GUIDES IN BOTH TRAYS MUST BE ADJUSTED TO THE

SAME SIZE 

PAPER TRAYS ARE NOT ADJUSTED TO SAME SIZE--PRESS i FOR

MORE DETAILS 

READY TO PRINT--BOTH PAPER TRAYS NOT SET FOR SAME

SIZE--PRESS i 

TRAY 1 SET FOR __.__X__.__" PAPER.  TRAY 2 SET FOR

__.__ X__.__" PAPER 

TRAY 1 SET FOR _X_MM PAPER.  TRAY 2 SET FOR _X_MM

PAPER 

WARMING UP--BOTH PAPER TRAYS NOT SET FOR SAME SIZE--

PRESS i 

Action

If tray switching is desired, reset the paper length guides to the

same size.  (Refer to the chapter on feeder trays in your 4635 LPS

Operator Guide.) 

OS2005

Enter ‘CONTINUE I’ to resume input 

or 

Select ‘CONTINUE I’ to resume input 

The input process was interrupted by the entered command or

error condition.  The system is now ready to resume input. 

Action

Enter the CONTINUE I command to resume interrupted data

transmission.

OS2006

Enter ‘CONTINUE I’ or ‘ABORT I’.  

or 

Select ‘CONTINUE I’ or ‘ABORT I.’

Input was interrupted due to insufficient file space or a DJDE

processing error.  The system is waiting for a command.

Action

Enter the CONTINUE I command to resume input.  (Some data

may be lost.)

or 

Enter the ABORT I command to cancel the job. 

OS2007

Empty sample output tray 

The sample tray contains more than 100 sheets.  It must be

emptied for printing to resume.  

The printer control console displays: 

EMPTY SAMPLE TRAY

Action

Remove output from the sample tray.

6-42

XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE