Xerox 721 Message Manual - page 195
PDL (JOB SOURCE LIBRARY COMPILATION) MESSAGES
PD2700
Operator command error, retry.
A PDL command was entered incorrectly.
Action
Reenter the command correctly.
PD2740
JSL not found. Check and retry.
JSL id was entered incorrectly.
Action
Reenter the JSL identification correctly.
or
Enter a different JSL id.
PD2915
Security violation.
A requested file has been protected by the SECURE system
command. An attempt was made to access it at a wrong logon
level.
Action
To access the file, obtain the correct password and logon at
Level 5. (Refer to your 4635 LPS Operations Reference, chapter
1, “System setup,” “File access and command protection
commands” section.)
PD4500
Tape read error.
The magnetic tape format does not match the language code
entered in JSL
Action
Reenter the code correctly.
PD4510
System not configured with tape drive.
A magnetic tape-related command was entered and the system
does not have a magnetic tape drive.
Action
None.
PD4550
PDL internal error -- Tape I/O.
The system is unable to read a magnetic tape block. Compiling
will abort.
Action
1. Clean the magnetic tape drive. (Refer to the maintenance
chapter in your 4635 LPS Operator Guide.)
2. Restart the job.
3. If the problem recurs, recreate the tape.
PD7050
Tape record size error.
The record size entered in JSL is incorrect for the tape format.
Action
Enter the correct record size.
XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE
7-3