Xerox 721 Message Manual - page 288
4635 LPS ADDITIONAL MESSAGES
SOR-output received out of sequence - already in output
phase.
A Start Of Report signal has been received from the ESS
beforebefore an End Of Report signal for the preceeding job.
Action
If the problem persists, call Xerox Customer Service.
Specified file does not exist.
An audit log desired for formatting, saving, deletion, or inquiry
does not exist.
Action
Change the name of the report entered in the request field, or
select from the list of audit logs.
System has insufficient disk space to format log xxxx.
Convert or Print request has been cancelled.
The PC user interface console log print file is full.
Action
Clear files on the PC UI hard disk to make more space for the
print log. If you don't want to clear space on the PC UI hard
disk, you can save the console log file to a floppy diskette and
print it from the diskette.
Target filename already exists.
An Audit Log with the same report name already exists on the
target device.
Action
Rename the target file or delete the old Audit Log and retry the
operation.
The Current Log is empty.
Information message only. You tried to display an empty current
console log.
The Current Log is in use and cannot be emptied.
The current console log is in use.
The Current Log is unreadable and cannot be
(emptied/deleted/printed/displayed/saved). Call for Service.
The current console log is unreadable and no action can be
performed on it.
Action
Call Xerox Customer Service.
The Current Log is unreadable and cannot be
(emptied/deleted/printed/displayed/saved). If the problem
persists, call for Service.
Action
1. Press the reset button on the PC user interface processor.
2. If the problem persists, call Xerox Customer Service.
XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE
15-45