Xerox 721 Message Manual - page 132
OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
OS2673
Enter the SUB INK Command or Abort the Print Job.
The printer requires a primary color that is not currently loaded.
This message prompts you with two available options:
Action
Enter a SUBSTITUTE INK command
or
Abort the print job.
OS2674
Enter the PQA Start Command.
The black and/or color housing(s) is not ready
Action
Enter the PQA START command.
OS2675
Abort the Report or Print Job.
The printer requires a primary color that is not currently loaded.
The message prompts you to perform one of several possible
options, such as:
Action
Enter a SUBSTITUTE INK command
or
Load the required color housing
or
Abort the job.
OS2676
Ink substitution is not allowed by this job.
You have requested ink substitution but ink substitution is not
allowed by the job.
Action
None.
OS2677
No ink substitutions are in effect.
This message follows a successful print quality adjustment when
no ink substitutions are currently in effect.
Action
None.
OS2678
Ink requested by the job is not available.
This command is used in a variety of conditions, usually when the
job calls for an ink that has not been defined. There is no
operator action, the report will either be aborted or the current
dry ink will be substituted automatically.
Action
None.
OS2679
Report aborted per job request
The printer requires a primary color that is not currently loaded.
The job specifies that the report be aborted in this situation.
Action
None.
OS2680
Print Quality Adjustment is required for color printing.
The color housing is not ready.
Action
Perform a print quality adjustment (PQA) before using the color
housing for color printing.
6-56
XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE