Xerox 721 Message Manual - page 180
OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
OS8560
Drive xxx not useable: should be drive yyy.
The Indicated system disk drive was formatted as drive yyy, then
moved to xxx position. The system disk cannot be used in the
new position until reformatted.
Action
Reformat the disk. (Refer to your 4635 LPS System Generation
Guide.)
OS8600
Unsuccessful completion of send data directive.
Displayed after RESET of the job in progress has been confirmed
following a system disk error. (This message is followed by
message OS1000 READY FOR COMMANDS hh:mm:ss.)
Action
None.
OS8650
Input has recovered to next job in queue.
During automatic job recovery following a system rollover, the
input task has attempted twice to recover data on the same
page, and once to recover the next report. Since this job
apparently cannot be printed, input moves to next job.
Action
1. Print the next job.
2. Submit an abort analysis dump (produced by system during
recovery process) to your systems specialist or Xerox
Customer Support.
OS8651
Output has recovered to next job in queue.
During automatic job recovery following a system rollover, the
output task has attempted twice to recover data on the same
page, and once to recover the next report. Since this job
apparently cannot be printed, output moves to the next job.
Action
1. Print the next job.
2. Submit the abort analysis dump (produced by system during
Recovery process) to your systems specialist or Xerox
Customer Service.
OS8700
Incorrect version of accounting file.
The accounting file is corrupt or outdated.
Action
Contact your systems specialist or Xerox Customer Service for
assistance in obtaining correct software for the accounting file.
OS8704
Output task does not match IG/Printer type.
Sysgen was performed with a configuration that does not match
the current configuration.
Action
Resysgen with the proper configuration if authorized to do so
(refer to your 4635 LPS System Generation Guide),
or
Contact your systems specialist.
6-104
XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE