Xerox 721 Message Manual - page 50
IFU (INTERPRESS FONT UTILITY) MESSAGES
IF2330
Character x not found
The character shown in the message cannot be found within the
FIS font master.
Action
1. Verify that the character requested within the font profile is
the desired character.
2. Reenter the ADD command.
3. If the message reappears, contact your systems specialist or
Xerox Customer Support.
IF2332
Composite request (character x) requires RIP
The composite character requested in the font profile requires
RIP (raster image processor), which is not on your system.
Action
None.
IF2336
Map x was not found in IPFNTS.SYS
The requested Interpress character mapping is not found in the
character mapping tables that are stored in the IPFNTS.SYS file.
Action
Modify the font profile to refer to an existing map in the
IPFNTS.SYS file.
IF2342
Operation code must be a symbol
When entering the original command line, the system did not
encounter the READ or WRITE parameter.
Action
Reenter the command line, specifying either a READ or WRITE
parameter.
IF2344
Operation code must be read or write
A READ or WRITE parameter was not specified in the command
line.
Action
Reenter the command line, specifying either a READ or WRITE
parameter.
IF2346
Family xxx not found in family directory
In attempting to delete or list the requested family from the
directory, either the naming authority, character code, or type
style does not exist.
Action
None.
IF2400
FIS name is not in easy value
The font name specified in the FIS font master does not match
the font name specified in the font profile.
Action
None.
5-12
XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE