Xerox 721 Message Manual - page 258
4635 LPS ADDITIONAL MESSAGES
Messages 9038 through 9068
The following messages (9038 through 9068) are the results of
general problems/warnings/status that could occur when reading
the dialog to retrieve objects or actions.
9038
Invalid file code
DDB (Dialog Data Base) file cannot be opened because DOS
detected a disk error, or calling program has passed in a non-
existent file ID.
Action
1. Verify that all required files are installed.
2. Select the OK header button to retry the process. If the
problem persists, contact Xerox Customer Service to have
disk hardware checked for malfunction.
9040
DDB interface not initialized
DDB (Dialog Data Base) has not been initialized by calling
program.
Action
Select the OK header button to retry the process. If the problem
persists, contact Xerox Customer Service.
9041
Invalid access request code
The calling program has requested an invalid DDB (Dialog Data
Base) operation.
Action
Select the OK header button to retry the process. If the problem
persists, contact Xerox Customer Service.
9042
Memory lock failure
Insufficient memory to allow the DDB (Dialog Data Base)
functions to operate.
Action
1. Restart the PC user interface from Power On.
2. If the problem persists, contact Xerox Customer Service and
provide the UI Crash Log, if available.
9043
Memory unlock failure
Memory controlled by DDB (Dialog Data Base) functions cannot
be unlocked.
Action
1. Restart the UI from Power On.
2. If the problem persists, call for Xerox Customer Service and
provide the UI Crash Log, if available.
9044
Insufficient memory
Insufficient memory to allocate DDB (Dialog Data Base) file
control table.
Action
1. Ensure no other Microsoft Windows applications are running.
2. Restart the UI from Power On.
3. If the problem persists, call for Xerox Customer Service and
provide the UI Crash Log, if available.
XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE
15-15