Xerox 721 Message Manual - page 181
OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
OS8800
Insufficient dynamic memory - Input.
The number of features specified in JDE and/or DJDE require
more main memory than is available; or, multiple DJDE “JDE =”
or “JDL =” statements were entered incorrectly.
Action
Recreate the job, reducing the number and/or extent of features.
or
Recode DJDEs correctly and restart the job.
OS8850
File management initialization failure. Try rebooting.
The basic file management system has failed to perform correctly.
Action
1. Enter the LIST command to print file directories and
document the problem.
2. Press the Boot button and enter the B to reboot the system.
3. Restart the job.
4. If the problem continues, resysgen the disk if authorized to
do so (refer to your 4635 LPS System Generation Guide),
or
Contact your systems specialist.
OS8852
Invalid font file header.
The input task is unable to read a font file header due to
software or system disk/CPU problems. The job will abort.
Action
1. Reload the font file. (Refer to your 4635 LPS Operations
Reference chapter on using the font editor for additional
information.)
2. Restart the job.
OS8855
Invalid form file header.
The input task is unable to read a form file header due to
software or disk/CPU problems. The job will abort.
Action
1. Recompile the form with the correct file header. (Refer to
your 4635 LPS Forms Creation Guide.)
2. Reload form file to system disk. (Refer to your 4635 LPS
Operations Reference chapter on managing LPS resources for
additional information.)
3. Restart the job.
OS8860
Page format error. Page will not be printed.
The job has improper metacodes.
Action
1. Retry the job.
2. If the message reappears, check the software package that
emits the metacode, to ensure that the level is current.
3. Contact your systems specialist or Xerox Customer Support
for assistance, if necessary.
XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE
6-105