Xerox 721 Message Manual - page 78
OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
OS0060
Resuming full performance
The printer had been operating in a reduced performance mode
due to page complexity and is now returning to full performance.
Action
None.
OS0200
Main tray selected
This message confirms that the main tray (paper tray 1) has been
selected.
Action
None.
OS0201
Cluster xx selected trays: xxxxx
In response to a FEED cluster-name command, this confirms that
the cluster is selected and provides a list of feeder trays in the
named cluster.
Action
None.
OS0202
Cluster xx selected ***cluster has no current trays***
In response to a FEED cluster-name command, this confirms that
the cluster is selected and that the cluster has no feed trays
currently assigned to it.
Action
None.
OS0211
Paper tray xx selected
In response to a FEED tray-number command, this confirms that
the specified feeder tray is selected.
Action
None.
OS0250
Sample tray selected
In response to a SELECT TRAY command, this confirms that the
sample tray is now selected.
Action
None.
OS0310
Bin x selected
One of the following commands was entered:
—SELECT
—SELECT 1
—SELECT AUTO
—SELECT 1,SAMPLE
Output will be delivered to stacker bin x.
Action
None.
6-2
XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE