Xerox 721 Message Manual - page 252
4635 LPS ADDITIONAL MESSAGES
1555
Invalid parity; must be NONE, ODD, or EVEN
The parameter value of the “PARITY” statement in the SysUI
configuration file is invalid.
Action
Select the OK header button to retry the process. If the problem
persists, call Xerox Customer Service.
1556
Invalid databits; must be 7 or 8
The parameter value of the “DATABITS” statement in the SysUI
configuration file is invalid.
Action
Select the OK header button to retry the process. If the problem
persists, call Xerox Customer Service.
1557
Invalid stop bits; must be 1 or 2
The parameter value of the “STOPBITS” statement in the SysUI
configuration file is invalid.
Action
Select the OK header button to retry the process. If the problem
persists, call Xerox Customer Service.
1558
Invalid retry data; must be CONTINUOUS or NORMAL
The parameter value of the “RETRY” statement in the SysUI
configuration file is invalid.
Action
Select the OK header button to retry the process. If the problem
persists, call Xerox Customer Service.
1559
Missing baud rate from config data
The parameter value of the “BAUD” statement in the SysUI
configuration file is missing.
Action
Select the OK header button to retry the process. If the problem
persists, call Xerox Customer Service.
1560
Comm parameters specify invalid frame in config file
The sum of the parameter values for the “DATABITS”,
“STOPBITS” and “PARITY” statement in the SysUI configuration
file is invalid.
Action
Select the OK header button to retry the process. If the problem
persists, call Xerox Customer Service.
1561
Cannot create UI Dirty File; UI cannot run
MS-DOS cannot create a SysUI dirty file.
Action
Select the OK header button to retry the process. If the problem
persists, call Xerox Customer Service.
1562
Cannot open UI Dirty File; UI cannot run
MS-DOS cannot open the SysUI dirty file.
Action
Select the OK header button to retry the process. If the problem
persists, call Xerox Customer Service.
XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE
15-9