Xerox 721 Message Manual - page 79

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES

OS0320

Output tray 2 selected

One of the following commands was entered:

—SELECT

—SELECT 2

—SELECT AUTO

—SELECT 2,SAMPLE

Output will be delivered to stacker tray 2

.  

The printer control console displays

: 

Output tray 2 selected

Action

None.

OS0410

Separate is OFF

The SEPARATE OFF command was entered, cancelling the

previously entered SEPARATE command. 

Action

None.

OS0411

Stitch is OFF

Confirms a STITCH OFF command. 

Action

None.

OS0420

Separate is ON

The SEPARATE command was entered.  The system will switch

output to a currently inactive stacker tray at the start of the next

report.

Action

None.

OS0430

Set command accepted

Confirms a CLUSTER SET command.  (This includes CLUSTER

SET/NR, CLUSTER cluster-name SET, or CLUSTER cluster-name

SET/NR commands.) 

Action

None.

OS0500

Output stopped

The STOP or STOP O command was entered or the

key was pressed.  Printing has stopped.  (Input continues.) 

Action

To restart:

Enter CONTINUE or CONTINUE O 

or 

Press the key.

OS0510

Input stopped

The STOP or STOP I command was entered, or the key

was pressed.  The system has stopped transmitting data and is

reading it onto the system disk.

Action

To restart: 

Enter CONTINUE or CONTINUE I command 

or 

Press the key. 

XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE

6-3