Cabletron Systems Netlink FRX4000 User Manual - page 112
8-6
FRX4000/FRX6000 4.0 User Guide, Rev 01
Configuring a Dial Port
If the port will be connected to an auto-dial modem, configure the parameters on the
following screen.
Figure 8-4 X.25 Dial Port Parameters
Physical X.25 Port Parameters
The following table lists all parameters displayed on screens 1–3. (Some will or will
not be displayed depending on whether the physical interface is DSU.) CUG param-
eters are listed in
Table 8-2
and Dial Port parameters are listed in
Table 8-3
.
Table 8-1 Physical X.25 Port Parameters
Parameter
Valid Values
Default Value
Port Type
X.25
X.25
Physical Port Interface
see explanation
see explanation
Blocked Port Flag
Y/N
N
Line Speed
see explanation
FRX4000 –
56K
1
FRX6000 –
9600
1
Modulo
8
or
128
8
Maximum LAPB Window Size
1–7
or
1–127
2
7
N2 Retransmit Count
0–20
5
T1 Retransmit Period
(msec)
2000–15000
2000
T2 Wait Ack Period
(msec )
0–5000
1000
T3 Link Alive Period
(sec)
1–60
10
continued on next page
Node Name=nodexyz
X.25 Port Parameters (screen 6 of 6)
Database
System Memory
A Dial Support
Dial In
Dial In
B Inactivity Timer (minutes)
5
5
C Disconnect Timer (sec)
5
5
D Line Setup Timer (sec)
1
1
Option: