Cabletron Systems Netlink FRX4000 User Manual - page 172
9-30
FRX4000/FRX6000 4.0 User Guide, Rev 01
Bandwidth Allocation Group
assigns the interface to one of sixteen groups whose parameters regulate bandwidth
usage. See "
Configuring Bandwidth Allocation Groups
" on page 7-6.
Host MAC Address
is the MAC address of the host or workstation to which the remote device needs to
connect.
Session Type
if
Originated
, means that LLC2 connections from the configured
Host MAC Address
can use this interface. If
Terminated
, connections to the configured address can use this
interface.
LAN ID
identifies the ring number used by a frame relay-compliant source-route bridge at the
other end of this PVC. The value is normally assigned by a system administrator.
Each LAN ID must be unique within the network on which this
node will operate.