Cabletron Systems Netlink FRX4000 User Manual - page 269
Configuring SNMP
16-3
System Contact
identifies someone at the node site who can be contacted if there are issues.
Configuring a Community Table
Up to 16 SNMP manager devices can gain access to the SNMP agent in an FRX4000
or FRX6000. Each manager device is configured with a community name, which
identifies it to agents and other managers, and is included in SNMP requests to a node.
A request will be accepted only if the name is in the node’s Community Table.
Press
[B]
at the SNMP Configuration Menu
to display the table.
Figure 16-2 SNMP Community Table Menu
[A],[A],[D],[B]
from Main Menu
To configure an entry, press the corresponding "
Seq
" (sequence) number. To delete an
entry, select it, then press
[D]
(and
[Y]
when asked to confirm). All entries below a
deleted one will move up one in the list.
Node Name=node_xyz
Community Table
A Seq
B Name
C Access
D
Del
1
name1
Read_write
2
name2
Read_write
3
name3
Read_write
4
name4
Read_write
5
name5
Read_write
6
name6
Read_write
7
name7
Read_write
8
name8
Read_write
9
name9
Read_write
10
name10
Read_write
11
name11
Read_write
12
name12
Read_write
13
name13
Read_write
14
name14
Read_write
15
name15
Read_write
16
name16
Read_write
Option::