Cabletron Systems Netlink FRX4000 User Manual - page 350
21-6
FRX4000/FRX6000 4.0 User Guide, Rev 01
305.
RLP Msg Queued exceeded T:“n” C: “n”
Severity:
4
Meaning:
The RLP statistic
Number of Queued Messages
has exceeded the
threshold (
T:“n”
) that was set by the user. (
C:“n”
is the current
value.)
Action:
If this happens frequently, you may need to reroute some traffic.
306.
RLP Rcv Frm/Sec exceeded T:“n” C:“n”
Severity:
4
Meaning:
The RLP statistic
Received Frames/Sec (*100)
has exceeded the
threshold (
T:“n”
) that was set by the user. (
C:“n”
is the current
value.)
Action:
If this happens frequently, you may need to reroute some traffic.
307.
RLP Trn Frm/Sec exceeded T:“n” C:“n”
Severity:
4
Meaning:
The RLP statistic
Transmitted Frames/Sec (*100)
has exceeded the
threshold (
T:“n”
) that was set by the user. (
C:“n”
is the current
value.)
Action:
If this happens frequently, you may need to reroute some traffic.
308.
RLP Rej Frm/Sec exceeded T:“n” C:“n”
Severity:
4
Meaning:
The RLP statistic
Rejected Frames/Sec (*100)
has exceeded the
threshold (
T:“n”
) that was set by the user. (
C:“n”
is the current
value.)
Action:
If this happens frequently, check the line for noise, and check for
configuration errors on both the port and the connected device.
309.
RLP Rtrn Frm/S exceeded T:“n” C:“n”
Severity:
4
Meaning:
The RLP statistic
Retransmitted Frames/Sec (*100)
has exceeded the
threshold (
T:“n”
) that was set by the user. (
C:“n”
is the current
value.)
Action:
If this happens frequently, check the line for noise, and check for
configuration errors on both the port and the connected device.
311.
Rcv Frm/Sec exceeded T:“n” C:“n”
Severity:
4
Meaning:
The port statistic
Received Frames/Sec (*100)
has exceeded the
threshold (
T:“n”
) that was set by the user. (
C:“n”
is the current
value.)
Action:
If this happens frequently, you may need to reroute some traffic.