Cabletron Systems Netlink FRX4000 User Manual - page 74
5-12
FRX4000/FRX6000 4.0 User Guide, Rev 01
T1 LIC Parameters
Line Coding
specifies the physical line encoding technique used to carry clock signals, per AT&T
ACCUNET T1.5 Service Description and Interface Specification. Note that B8ZS
stands for Bipolar Eight Zero Code Substitution, and AMI is Alternate Mark
Inversion.
Framing
specifies the T-1 framing format, per ANSI T1.403, 1995. Note that ESF stands for
Extended Superframe Format.
Line Service
determines whether full or channelized T-1 will be run over the LIC port.
Line Build Out
is based on the distance from the RLP to the external T1 device, and is normally dic-
tated by the telephone company that supplies the line.
Clocking
determines whether clock will be generated by the T1 port (
Master
) or the remote
device (
Slave
).
Base Chl Speed
determines the line speed over each channel.
Starting Chl Number
determines the lowest channel number that will be used.
Num of Chnls
is the number of channels that will be used on the T1 line.
E1 Parameters
Line Coding
is the line coding technique used to carry clock signals.
Framing
is the frame format. G.704 is a CEPT standard, with a set value.
Line Service
determines whether full or channelized T-1 will be run over the LIC port.
Line Build Out
relates to the distance from the RLP to the external E1 device. G.703 is a CEPT
standard, with a set value.
Clocking
determines whether clock will be generated by the E1 port (
Master
) or the remote
device (
Slave
).
Base Chl Speed
determines the line speed over each channel.