Cabletron Systems Netlink FRX4000 User Manual - Configuring Subscriber Ids
Configuring X.25
8-21
Incoming Access Allowed
determines whether this port will be allowed to receive calls from outside its CUGs.
Outgoing Access Allowed
determines whether this port will be allowed to make calls outside its CUGs.
Add/Change CUG
To configure a CUG, select this entry and, when prompted, enter:
●
CUG Index,
0-99
(the default is
0
), which is a reference to the CUG.
●
CUG number,
1-16383
(the default is
1
), that will be associated with the index.
●
any other requested information. (See
Table 8-5
on page 8-16.)
Delete CUG
To delete a CUG, select this item and enter the index (see "
Add/Change CUG
") of the
CUG to be deleted.
Display All CUGs
Selecting this item will display a list of all configured CUGs.
Configuring Subscriber IDs
This operation configures the called and calling addresses that will be used in call
setup. To complete the connection, the software must recognize where the call is
coming from (calling address) and where it is going (called address).
To display a list of current Subscriber IDs (addresses), press
[A]
at the Connections and
Routing Paths Menu (or
[A]
,
[D]
,
[A]
from the Main Menu).
To add or change a Subscriber ID, press
[B]
at the Connections and Routing Paths
Menu. When prompted, enter a Subscriber ID of up to 15 digits. (ID conventions are
described on
page 8-22
.)