Cabletron Systems Netlink FRX4000 User Manual - page 342
20-18
FRX4000/FRX6000 4.0 User Guide, Rev 01
●
RIP N_Query Tx
– is the number of RIP Nearest Queries transmitted on the
interface.
●
RIP G_Resp Tx
– is the number of RIP General Responses (responses to General
Queries) transmitted on the interface.
●
RIP N_Resp Tx
– is the number of RIP Nearest Responses (responses to Nearest
Queries) transmitted on the interface.
●
RIP Pkts Rcv
– is the number of RIP packets received on the interface.
●
RIP G_Query Rcv
– is the number of RIP General Queries received on the
interface.
●
RIP N_Query Rcv
– is the number of RIP Nearest Queries received on the
interface.
●
RIP G_Resp Rcv
– is the number of RIP General Responses (responses to
General Queries) received on the interface.
●
RIP N_Resp Rcv
– is the number of RIP Nearest Responses (responses to Nearest
Queries) received on the interface.
●
RIP Aged Entries
– is the number of entries that have been deleted from the
routing information table, due to expiration of the
RIP Age Timer
, configured in
the IPX Interface record (described in
Chapter 14
).
●
RIP Prd_Broadcasts
– is the number of periodic RIP messages broadcast from
this node advertising the available routes (from the routing table in the
FRX4000/6000).
●
RIP Upd_Broadcasts
– is the number of RIP messages broadcast from this node
to update the network with any changes in routes.
●
RIP INV Net Rcv
– is the number of RIP packets received with an invalid network
address (one that does not match the network address configured on the
interface). These packets will be discarded.
●
RIP Worse Rt Rcv
– is the number of RIP packets received containing routing
updates that are less efficient (worse) than the routes already in the routing
information table.
●
RIP Ukn G_Query
– is the number of RIP General Queries received with an
invalid packet size. These packets will be discarded.
●
RIP Ukn N_Query
– is the number of RIP Nearest Queries received with an
invalid packet size. These packets will be discarded.
●
RIP Ukn G_Resp
– is the number of RIP General Responses received with an
invalid packet size. These packets will be discarded.
●
RIP Ukn N_Resp
– is the number of RIP Nearest Responses received with an
invalid packet size. These packets will be discarded.
●
SAP Pkts Tx
– is the number of SAP packets transmitted on the interface.
●
SAP G_Query Tx
– is the number of SAP General Queries transmitted on the
interface.
●
SAP N_Query Tx
– is the number of SAP Nearest Queries transmitted on the
interface.
●
SAP G_Resp Tx
– is the number of SAP General Responses (responses to
General Queries) transmitted on the interface.
●
SAP N_Resp Tx
– is the number of SAP Nearest Responses (responses to Nearest
Queries) transmitted on the interface.