Cabletron Systems Netlink FRX4000 User Manual - page 248
14-16
FRX4000/FRX6000 4.0 User Guide, Rev 01
PVC Connection
identifies this interface as one end of a PVC.
Descriptions of Parameters Specific to LAN Interfaces
LAN Card Number
identifies the card. The first or only LAN card installed is always card
0
, and the
second is card
1
. (Although the FRX4000 does not have a LAN card, it’s LAN
interface is identified as
0
.)
Configuring Static IPX Routes
Routing of IPX traffic is handled dynamically by such protocols as RIP and SAP, as
well as via static routes configured in the FRX4000/6000.
To display configured static routes, press
[H]
at the Connections and Routing Paths
Menu (or
[A], [D], [H]
from the Main Menu).
To configure a route, press
[I]
at the Connections and Routing Paths Menu. When
prompted, enter:
●
Type
:
0
(RIP) or
1
(SAP). (The default is
0
.)
●
Route/Service Number
:
0–65535
. (The default is
0
.). This is simply an identifier.
The display will be similar to the RIP example in the following figure. (A SAP record
will display different parameters.)
Figure 14-5 IPX RIP Route Record
[A],[D],[I]
from Main Menu
Node Name=node_xyz
IPX Route Maintenance
*
Type
0–RIP
*
Route Number
23
A Network Address
0000f0ac
B Hops
26
C Transport Time
30
D Router
00000000ff34
E Interface
5
Option::