Cabletron Systems Netlink FRX4000 User Manual - page 355
System Events
21-11
411.
Received Reset LCN = “n", cc = “n” dc = “n”
Severity:
4
Meaning:
A Reset was received on the designated LCN, with the cause code
cc
and diagnostic code
dc
. (See
Appendix B
for a list of codes.)
Action:
None.
412.
Received Reset Confirm
Severity:
4
Meaning:
A Reset Confirmation was received.
Action:
None.
413.
PAD Link Failed
Severity:
2
Meaning:
Self-explanatory.
Action:
Check the async PAD port and its cables for proper operation and
secure connection.
414.
Beginning of Congestion
Severity:
4
Meaning:
The level of
Max Congestion
specified in Node Defaults (see Chapter
4) has been exceeded, and no more events will be put into the event
buffer until the
Min Congestion
level (also specified in Node
Defaults) has been reached.
Action:
If this occurs frequently, you may want to increase the level of
Maximum Congestion
specified in Node Defaults.
415.
End of Congestion, “n” events lost
Severity:
4
Meaning:
The
Minimum Congestion
level has been reached. (See event 414.)
Action:
None.
416.
PAD Autocall Retries Exhausted
Severity:
3
Meaning:
The async PAD retry timer has expired without a connection being
established.
Action:
None; however, if this occurs with any frequency, you may want to
increase the timer (
Retry Count
) or check the remote async device for
problems.
417.
Frame Relay Link Failed
Severity:
1
Meaning:
The physical link is down.
Action:
Check the cables for secure connections and proper operation.