Cabletron Systems Netlink FRX4000 User Manual - Displaying Port Status
19-2
FRX4000/FRX6000 4.0 User Guide, Rev 01
Displaying Port Status
Press
[B]
at the Status Displays Menu to display the status of all serial lines on this
node (LAN port status is not displayed).
Figure 19-2 Port Status Display
[C],[B]
from Main Menu
If the node has more than 32 ports, some of them will be displayed on sub-
sequent "pages" (up to 18 total) of the above menu. Press
[PgDn]
to display
them.
Information in this Display:
●
L
– is the RLP number.
●
P
– is the port number.
●
Type
– is the port type:
FRL
= Frame relay
X25
= X.25
SNA
= SNA
BSI
= BSC Interactive
BSI
= BSC Batch
ASY
= Async PAD
LOG
= Logical
Eth
= Ethernet
8023
= 802.3
8025
= 802.5.
●
PPS
– is packets per second passing through the port.
●
Conn#
– is the number of virtual connections currently in use.
●
State
:
Linkup
– The necessary level 1 modem signals are present, and the level
2 link is up. (For frame relay PVCs, this state means that LMI is running.)
Restarting
– Level 2 is up and level 3 is starting its initial handshake
sequence.
Operational
– The line is up and ready to establish a connection or transfer
data. On a frame relay logical DTE port with link layer management con-
figured, this state means that the port has received a Full Status Response
Node Name=node_xyz
Port Status Display (Page 1)
L P
Type
PPS
Conn#
State
L
P
Type PPS
Conn#
State
0
0
X25
62
4
Operational
0
1
X25
127
12
Operational
0
2
X25
112
7
Operational 0
3
X25
60
6
Operational
0
4
SNA 110
3
Operational
0
5
X25
87
5
Operational
1
0
ASY
0
0
Disabled
1
1
X25
88
4
Operational
Ethernet