Cabletron Systems Netlink FRX4000 User Manual - page 328
20-4
FRX4000/FRX6000 4.0 User Guide, Rev 01
●
% Receive port util
– ratio of non-flag characters to total characters being
received by the port.
●
% Transmit port util
– ratio of non-flag characters to total characters being trans-
mitted by the port.
Configuring Port Statistics Thresholds
For each port statistic, you can specify a threshold that, when crossed, causes an alarm
to be sent to the collecting node.
Press
[A]
at the Statistics Menu. When prompted, enter:
●
Statistic level
:
P
for Port.
●
RLP
:
0
on FRX4000,
0–7
on FRX6000.
●
Port
:
0–7
.
A menu similar to the following figure will be displayed.
Figure 20-4 Port Statistics Configuration Menu
[E],[A]
from Main Menu
Changing a threshold changes the database value. Press
[F7]
to write the
change to system memory.
A threshold is either a number or a percentage, depending on the statistic. The valid
range for any statistic is
0–65535.
(Default =
0.
) When the measured value for the sta-
tistic crosses the threshold (in either direction), an alarm is generated.
Node Name=node_xyz
Port Statistics (Thresholds)
RLP: 0
Port: 1
Database
System Memory
A Received frames/Sec (*10)
0
0
B Transmitted frames/Sec (*10)
0
0
C Retran frames/Sec (*10)
0
0
D FCS errors/Sec (*10)
0
0
E Logical rejects/Sec (*10)
0
0
F
Transmit error ratio
0
0
G Receive error ratio
0
0
H % Receive port utilization
0
0
I
% Transmit port utilization
0
0
Option: