Cabletron Systems Netlink FRX4000 User Manual - page 340
20-16
FRX4000/FRX6000 4.0 User Guide, Rev 01
IP Interface Statistics
IP Interface statistics track IP traffic over the node interface. Press
[E]
at the Statistics
Menu and, when prompted, enter:
●
Interface Number
:
0–128
.
●
Report Interval
:
5–65535
. (Default is
5
.)
The display will be similar to the following figure, with
IP/LAN
or
IP/WAN
at the upper
left identifying the interface type.
Figure 20-11 IP Interface Statistics Display
[E],[E]
from Main Menu
CURR
is the current value, and
CUMULATIVE
is the total since the last IPL
of the node.
Information in this Display:
●
Packets In/Out
– is the number of packets received/transmitted over the
interface.
●
Bytes In/Out
– is the number of bytes received/transmitted over the interface.
●
Multi-Cast In/Out
– is the number of packets received/transmitted via a multicast
address over the interface.
●
Errors In
– is the number of errors received over the interface.
●
Errors Out
– is the number of errors transmitted over the interface.
●
Q Dropped In
– is the number of incoming Q-packets that were dropped.
●
Unknwn Protocol
– is the number of frames that were not accepted because they
contained an unknown protocol.
●
Collisions
– is the number of transmitted frames that were involved in collisions.
Node Name=node_xyz
IP Interface Statistics Display
Report Interval (sec): 5
Current Time: 02/05/98
10:32:45
Interface Number: 2
Type: FRL
MTU: 4096
STATISTIC
CURR
CUMULATIVE
STATISTIC
CURR
CUMULATIVE
Packets In
21
269134
Packets Out
21
269420
Bytes In
8161
139690157
Bytes Out
8161
139822450
Multi-Cast In
0
0
Multi-CastOut
0
0
Errors In
0
0
Errors Out
0
0
Q Dropped In
0
0
Unkwn Protocol
0
0
Collisions
0
0
F4:Clear Cumulative Statistics, Others:Exit