Cabletron Systems Netlink FRX4000 User Manual - page 168
9-26
FRX4000/FRX6000 4.0 User Guide, Rev 01
Configuring LLC2 Interfaces
LLC2 Interfaces records define the types and locations of the interfaces that will carry
LLC2 traffic to or from an FRX4000/6000.
To display configured interfaces, press
[C]
at the IP/LLC2/BRIDGE.IPX Interfaces
Configuration Menu:
Figure 9-9 LLC2 Interfaces Display
[A],[C],[E],[C]
from Main Menu
These interfaces can be used for either LLC2 or Bridging.
To configure an interface, press
[D]
at the LAN Interfaces Configuration Menu. When
prompted for an interface number (which is merely a sequential number to identify the
interface):
●
If modifying an existing record, enter the interface number:
0–95
.
●
If creating a new record, press
[Enter]
, which will automatically specify the next
available sequential interface number.
The display depends on the interface type. Examples are shown in the following two
figures.
Node Name=nodexyz
Review Bridge Ports/LLC-2 Interfaces
----------------------------------------------------------------------------------------------------------------------
Interface NumberType RLP
PortDLCIFormat
-----------------------------------------------------------------------------------------------------------------------
1
Ethernet
2
Frame Relay
0
1 30
Native LLC-2
3
Frame Relay
0
1 31
8025_SRB
4
Frame Relay
0
1 32
8025_SRB
5
Frame Relay
0
1 33
8023_TB
PgUp, PgDn, F3:Exit, F9:Stop Remote, F10:Abort