DAELIM VJF125 Service Manual - page 126
CLUTCH
CLUTCH
CLUTCH
CLUTCH
CLUTCH
CLUTCH
CLUTCH
CLUTCH
CLUTCH
CLUTCH
CLUTCH
CLUTCH
CLUTCH
CLUTCH
8-12
CLUTCH/GEARSHIFT
Install the right crankcase cover, aligning the spline
of the crank shaft and with the spline of the oil
pump shaft.
Install the crankcase cover bolts and clutch cable
holder.
TORQUE : 1.1kgf
m(11N
m)
Connect the clutch cable end to the clutch lever,
then install the clutch wire holder with the two
bolts.
Adjust the clutch lever free play. (
2-12)
Remove the oil level gauge, then fill the crankcase
with the recommended oil.(
3-3)
SPLINE
SPLINE
SPLINE
SPLINE
SPLINE
SPLINE
SPLINE
SPLINE
SPLINE
SPLINE
SPLINE
SPLINE
SPLINE
SPLINE
SPLINE
SPLINE
Connect the radiator hose
Pour the coolant.
If any difficulty is encountered in joining the
crank shaft spline to the oil pump shaft spline,
remove the crankshaft hole cap, then install the
right crank case cover while turning the
crankshaft to the right slowly.
CLUTCH WIRE HOLDER
CLUTCH WIRE HOLDER
CLUTCH WIRE HOLDER
CLUTCH WIRE HOLDER
CLUTCH WIRE HOLDER
CLUTCH WIRE HOLDER
CLUTCH WIRE HOLDER
CLUTCH WIRE HOLDER
CLUTCH WIRE HOLDER
CLUTCH WIRE HOLDER
CLUTCH WIRE HOLDER
CLUTCH WIRE HOLDER
CLUTCH WIRE HOLDER
CLUTCH WIRE HOLDER
CLUTCH WIRE HOLDER
CLUTCH WIRE HOLDER
BOLTS
BOLTS
BOLTS
BOLTS
BOLTS
BOLTS
BOLTS
BOLTS
BOLTS
BOLTS
BOLTS
BOLTS
BOLTS
BOLTS
BOLTS
BOLTS
OIL LEVEL GAUGE
OIL LEVEL GAUGE
OIL LEVEL GAUGE
OIL LEVEL GAUGE
OIL LEVEL GAUGE
OIL LEVEL GAUGE
OIL LEVEL GAUGE
OIL LEVEL GAUGE
OIL LEVEL GAUGE
OIL LEVEL GAUGE
OIL LEVEL GAUGE
OIL LEVEL GAUGE
OIL LEVEL GAUGE
OIL LEVEL GAUGE
OIL LEVEL GAUGE
OIL LEVEL GAUGE