DAELIM VJF125 Service Manual - page 227
16-8
HYDRAULIC BRAKE
Remove the rear caliper bracket bolts and brake
caliper.
Remove the hanger pins and brake pads.
Make sure the brake pad spring is in place.
Install the new brake pads.
Install the hanger pins.
TORQUE : 2.3 kgf
m
Install the brake caliper to the caliper bracket so the
disk is positioned between the pads.
Install and tighten the caliper bracket bolts.
TORQUE : 3.0 kgf
m (30 N
m)
Tighten the hanger pins and pin plugs.
TORQUE : 1.8 kgf
m (18 N
m)
Install the rear brake hose clamp.
Install the rear wheel mudguard.
BRAKE PADS
BRAKE PADS
BRAKE PADS
BRAKE PADS
BRAKE PADS
BRAKE PADS
BRAKE PADS
BRAKE PADS
BRAKE PADS
BRAKE PADS
BRAKE PADS
BRAKE PADS
BRAKE PADS
BRAKE PADS
BRAKE PADS
BRAKE PADS
HANGER PINS
HANGER PINS
HANGER PINS
HANGER PINS
HANGER PINS
HANGER PINS
HANGER PINS
HANGER PINS
HANGER PINS
HANGER PINS
HANGER PINS
HANGER PINS
HANGER PINS
HANGER PINS
HANGER PINS
HANGER PINS