DAELIM VJF125 Service Manual - Brake Pad/disk
BRAKE PAD/DISK
FRONT BRAKE PAD REPLACEMENT
Push the caliper pistons all the way in to allow
installation of new brake pads.
Remove the hanger pin and brake pads.
Clean the inside of the caliper especially around the
caliper pistons.
Remove the brake hose clamp from the front fork.
Remove the pin plug using the L. wrench.
Loosen the hanger pin.
Remove the caliper bracket bolts and brake capliper.
16-6
HYDRAULIC BRAKE
HANGER PINS
HANGER PINS
HANGER PINS
HANGER PINS
HANGER PINS
HANGER PINS
HANGER PINS
HANGER PINS
HANGER PINS
HANGER PINS
HANGER PINS
HANGER PINS
HANGER PINS
HANGER PINS
HANGER PINS
HANGER PINS
HANGER PINS
HANGER PINS
BRAKE PADS
BRAKE PADS
BRAKE PADS
BRAKE PADS
BRAKE PADS
BRAKE PADS
BRAKE PADS
BRAKE PADS
BRAKE PADS
BRAKE PADS
BRAKE PADS
BRAKE PADS
BRAKE PADS
BRAKE PADS
BRAKE PADS
BRAKE PADS
When replacing brake pads, replace whole set.
Do not remove the brake hose when replacing brake
pads.