DAELIM VJF125 Service Manual - page 201
14-21
FRONT WHEEL/FRONT FORK/STEERING
RACE REPLACEMENT
Install the new ball races into the head pipe using the
driver and attachment.
Remove the ball races from the steering head using the
ball race dirver.
TOOL : BALL RACE DRIVER
Temporarily install the steering stem nut onto the stem
to prevent the threads from being damaged when
removing the bottom cone race from the stem.
Remove the bottom cone race with a chisel or
equivalent tool, being careful not to damage the stem.
Remove the dust seal and washer.
Apply grease to new dust seal lips and install it over
the steering stem.
Install a new bottom cone race using a special tool and
a hydraulic press.
TOOL : STEERING STEM DRIVER
Replace the cone reces and ball races in pairs.
DRIVER
ATTACHMENT
STEERING STEM DRIVER
STEERING STEM DRIVER
STEERING STEM DRIVER
STEERING STEM DRIVER
STEERING STEM DRIVER
STEERING STEM DRIVER
STEERING STEM DRIVER
STEERING STEM DRIVER
STEERING STEM DRIVER
STEERING STEM DRIVER
STEERING STEM DRIVER
STEERING STEM DRIVER
STEERING STEM DRIVER
STEERING STEM DRIVER
STEERING STEM DRIVER
STEERING STEM DRIVER
BOTTOM CONE RACE/DUST SEAL
BOTTOM CONE RACE/DUST SEAL
BOTTOM CONE RACE/DUST SEAL
BOTTOM CONE RACE/DUST SEAL
BOTTOM CONE RACE/DUST SEAL
BOTTOM CONE RACE/DUST SEAL
BOTTOM CONE RACE/DUST SEAL
BOTTOM CONE RACE/DUST SEAL
BOTTOM CONE RACE/DUST SEAL
BOTTOM CONE RACE/DUST SEAL
BOTTOM CONE RACE/DUST SEAL
BOTTOM CONE RACE/DUST SEAL
BOTTOM CONE RACE/DUST SEAL
BOTTOM CONE RACE/DUST SEAL
BOTTOM CONE RACE/DUST SEAL
BOTTOM CONE RACE/DUST SEAL