DAELIM VJF125 Service Manual - Cylinder Head Installation
Other manuals for VJF125:
Service Manual
of
295
10-11
CYLINDER HEAD / VALVES
When install the ‘cylinder head special socket nut’ (M8
1.25), tighten them for 2~3times(Refer to the upper
picture)
half installation
Complete installation
Complete installation
Complete installation
Complete installation
TORQUE : 2.0 kgf m
Install the cylinder head.
(Install in the remove order of removal)
CYLINDER HEAD INSTALLATION
Clean any gasket material from the cylinder mating surface.
Install the cam chain guide to the cylinder.
Install the dowel pins and new gasket.
Install the cam chain tensioner, and assemble pivot
bolts.
TORQUE : 1.0 kgf m (10N m)
Install the spark plug.
TORQUE : 1.1 kgf m (11N m)
Take necessary precautions not to damage the valve.
Tap the valve stems gently with a soft hammer to
firmly seat the cotters.