DAELIM VJF125 Service Manual - page 88
Other manuals for VJF125:
Service Manual
of
295
EMS(Engine Management System)
5-36
Remove the fuel level gauge (19-10)
Measure the resistance between terminals.
The float position is based on the tank bottom plate after assemble.
Measure the resistance between Y/W (YELLOW/WHITE) wire and G(GROUND)
wire of fuel unit terminal
Remark : Measuring unit of resistance : Resistance[
]
If the measured resistance value is out of standard at float position, replace the fuel unit.
CHECKING OF THE FUEL LEVEL GAUGE.
The FLOAT position
F : 192[mm]
1/2 : 138[mm]
E : 74[mm]
Terminals resistance [
]
33
15[
]
300
20[
]
566
15[
]