DAELIM VJF125 Service Manual - Crankcase Disassembly
12-3
CRANKCASE/TRANSMISSION/CRANKSHAFT
CRANKCASE DISASSEMBLY
The engine must be separated from the frame.
(
section 6)
Refer to the service information for removal of
necessary parts before disassembling the
crankcase.
Remove the gear change switch.
Remove the 6mm bolt from the right crankcase.
Place the crank case down, and separate the right
crankcase from the left crankcase by tapping the
crankcase with a soft hammer.
Remove the cam chain.
Remove the crankcase breather tube.
Loosen the ten 6mm crankcase bolts in a crisscross
pattern in 2~3 steps, remove the bolts.
Remove the dowel pins and gasket.
DOWEL PINS
DOWEL PINS
DOWEL PINS
DOWEL PINS
DOWEL PINS
DOWEL PINS
DOWEL PINS
DOWEL PINS
DOWEL PINS
DOWEL PINS
DOWEL PINS
DOWEL PINS
DOWEL PINS
DOWEL PINS
DOWEL PINS
DOWEL PINS
Be careful not to distort the mating surface of the
crankcase during removal.