DAELIM VJF125 Service Manual - Starter Clutch
9-7
A.C GENERATOR / STARTER CLUTCH
Connect the A.C generator wire coupler and gear
change wire coupler.
Install the wire clamp.
Install the L. rear cover.
Install the gear change arm a ligning its slit with
the punch mark on the gearshift spindle.
Install and tighten the pinch bolt to the specified
torque.
TORQUE : 1.2kgf
m(12N
m)
STARTER CLUTCH
INSPECTION
Grip the flywheel.
Check the operation of the one-way clutch by
turning the driven gear.
You should be able to turn the driven gear
counterclockwise smoothly, but the gear should not
turn clockwise.(as like photo)
DISASSEMBLY
Remove the three socket bolts, and remove the one
way clutch from the flywheel.
STARTER IDLE GEAR SHAFT
STARTER IDLE GEAR SHAFT
STARTER IDLE GEAR SHAFT
STARTER IDLE GEAR SHAFT
STARTER IDLE GEAR SHAFT
STARTER IDLE GEAR SHAFT
STARTER IDLE GEAR SHAFT
STARTER IDLE GEAR SHAFT
STARTER IDLE GEAR SHAFT
STARTER IDLE GEAR SHAFT
STARTER IDLE GEAR SHAFT
STARTER IDLE GEAR SHAFT
STARTER IDLE GEAR SHAFT
STARTER IDLE GEAR SHAFT
STARTER IDLE GEAR SHAFT
STARTER IDLE GEAR SHAFT
SOCKET BOLT