DAELIM VJF125 Service Manual - page 202
14-22
FRONT WHEEL/FRONT FORK/STEERING
Install the steel ball.
Apply grease to top and bottom ball races and cone
races.
Instert the steering stem into the steering head pipe.
Insall the steel ball and top cone race.
Install and tighten the steering head top thread to the
initial torque.
TORQUE : 2.5 kgf
m (25N
m)
TOOL : STEERING STEM SOCKET
Move the steering stem right and left, five times to seat
the steel balls.
Make sure that the steering stem moves smoothly,
without play or binding ; then loosen the steering head
top thread.
Retighten the steering head top thread to the specified
torque.
TORQUE : 0.3 kgf
m (3N
m)
Recheck that the steering stem moves smoothly
without play or binding.
INSTALLATION
TOP CONE RACE
STEEL BALLS
STEEL BALL RACE
STEERING STEM
FR. BRAKE HOSE STAY
STEEL BALL RACE
STEEL BALLS
WASHER
DUST SEAL
STEERING HEAD TOP THREAD
BOTTOM CONE RACE