Raymarine HSB Chartplotter User Manual - page 132
Chapter 6: Installation
115
D3650-2
SYSTEM SET UP MENU
DATA BOXES
BEARING MODE
CURSOR REFERENCE
CURSOR READOUT
DAY/NIGHT
HELP
SOFT KEYS
KEY BEEP
MOB DATA
MENU TIMEOUT PERIOD
DISTANCE UNITS
SPEED UNITS
DEPTH UNITS
TEMPERATURE UNITS
VARIATION SOURCE
CURSOR ECHO
DATE FORMAT
TIME FORMAT
TIME OFFSET
LANGUAGE
HSB STATUS
SIMULATOR
TRUE
RELATIVE
RNG/BRG
RNG/BRG
ON
ON
ON
DR
NO TIMEOUT
NAUTICAL MILES
KNOTS
METRES
CENTIGRADE
AUTOMATIC
DD/MM/YY
24 HOUR
UTC
ENGLISH (UK)
NOT CONNECTED
OFF
3. Use the trackpad to move the selection bar down to the LANGUAGE
option. The soft key labels are updated.
4. Use the soft keys to highlight the required language.
5. Press ENTER to return to the setup soft key labels.
6. Press CLEAR to return to the normal chart screen.
Checking the Chartplotter Operation
To confirm your chartplotter is operating correctly, perform the following
checks:
1. Without a chart card fitted, verify that the world map is visible.
Press the trackpad left/right, up/down and check cursor movement
and normal scrolling action.
2. Insert a chart cartridge for the area of your vessel.
Use the RANGE key to zoom-in to check that the new chart cartridge
is being displayed.
3. Ensure that position data is available at the display via NMEA or
SeaTalk. Check the cursor is fixed on the vessel symbol which is
correctly positioned at the centre of the chart display.
Checking the
Chartplotter
Operation