Raymarine HSB Chartplotter User Manual - Solving

Chapter 7: Maintenance and Problem Solving

117

Chapter 7: Maintenance and Problem

Solving

This chapter provides information on routine maintenance and on

possible causes of problems you may experience with your HSB Series

Chartplotter.

7.1 Maintenance

Warnings

The chartplotter display unit contains high voltage. Adjustments require

specialised service procedures and tools only available to qualified

service technicians - there are no user serviceable parts or adjustments

and the operator should not attempt to service the equipment. The

operator should not remove the rear cover of the `display or any internal

covers in the scanner.

Always turn the radar system off before carrying out any routine

maintenance on the scanner or nearby equipment.

Routine Checks

The Chartplotter display ia a sealed unit. Maintenance procedures are

therefore limited to the following periodical checks:

• Wipe the display clean with a damp cloth.

• Examine the cables for signs of damage, such as chafing, cuts or

nicks

• Check that the cable connectors are firmly attached

EMC Servicing and Safety Guidelines

• Raytheon equipment should be serviced only by authorised Raytheon

service engineers. They will ensure that service procedures and

replacement parts used will not adversely affect performance. There

are no user serviceable parts in any Raytheon product.

• High voltages are generated in the display unit. Never handle the

cables/connectors when power is being supplied to the equipment.

• Always report any EMC related problem to your nearest Raytheon

dealer. We will use any such information to improve our quality

standards.

Chapter 7

Maintenance &

Problem Solving