Raymarine HSB Chartplotter User Manual - Clearing The Current Route

54

HSB Series Chartplotter

If you wish to name the route press the YES soft key. Use the

trackpad to move the cursor right or left to the character you wish to

edit. Then use the top or bottom of the trackpad to increase or

decrease the letter or number.

5. Press ENTER to finish and clear the Name List, then to return to the

default soft key display, press ENTER again.

Clearing the Current Route

You can clear the current route from the screen. When you select

CLEAR ROUTE if the current route has not been saved, you have the

option of saving it and, if you are following the current route, you have the

option to stop.

➤

To clear the current route:

1. Press the ROUTE default soft key or place the cursor over a route

leg until the text RTE is displayed.

Press the CLEAR ROUTE soft key.

2. If you are following the current route the STOP FOLLOW soft keys

are displayed.

To cancel the CLEAR operation press NO.

To stop following and clear the route press YES.

3. If the route has not been saved the SAVE ROUTE soft keys are

displayed.

To clear the route, without saving it in the route database, press NO.

To save the route in the database, press YES. The Name route soft

keys are displayed and you should continue as described in the

previous section, Saving the Current Route.

The current route is cleared from the screen and the default soft keys are

displayed. You can now use the ROUTE soft keys to make a route, or to

show another route from the database.

Retrieve a Route From the Database

You can select a route as the current route from the database list. The

list is accessed from the second set of ROUTE soft keys.

➤

To select a route as the current route:

1. Press the ROUTE soft key, followed by MORE, then press ROUTE

LIST. The route list is displayed. The grey selection bar indicates the

selected route.

Clearing the

Current Route &

Retrieving a Route

CLEAR

ROUTE

ROUTE

LIST