Raymarine HSB Chartplotter User Manual - Erasing A Waypoint

48

HSB Series Chartplotter

3. To edit the symbol, press the SYMBOL soft key.

Use the soft keys, shown in the following illustration, to highlight the

required symbol , then press ENTER.

SELECT SYMBOL

D4178-1

4. To edit the waypoint name, press the NAME soft key.

The NAME WAYPOINT window is displayed.

Use the trackpad to enter or edit the name:

Use the left or right side of the trackpad to move the cursor to the

character you wish to change.

Use the top or bottom of the trackpad to scroll through the

characters.

When you have finished editing the name, to remove the window,

press ENTER. The waypoint name replaces the waypoint number.

5. Press the EDIT WAYPOINT soft key, followed by POSITION. The

Waypoint Position pop-up is displayed.

Use the soft keys to select LAT, LON, BRG or RNG.

Use the trackpad to edit the value.

Use the left or right side of the trackpad to move the cursor to the

character you wish to change.

Use the top or bottom of the trackpad to scroll through the

characters.

Adjust each parameter until the waypoint position is correct.

When you have finished editing the position, press ENTER. The

Waypoint Position window is removed from the screen and the

default soft keys are displayed.

Press ENTER or CLEAR twice to return to the default softkeys.

Erasing a Waypoint

You cannot erase the target waypoint or waypoints that are used in

routes. However, you can remove a waypoint from the current route -

see Editing a Route in Section 3.3.

If you try to erase a waypoint that is used in a saved route you are

warned “WAYPOINT IS USED IN A ROUTE & CANNOT BE

DELETED”

Erasing a

 Waypoint

EDIT

WAYPOINT